How to remove links from your Maui Kool watch
-
Identify the link you would like removed and find the hole on either side of the band.
- With a tool or a pin pusher (not included with the watch), slowly but with a decent amount of pressure push on the pin until the pin starts coming out from the opposite side. NOTE: Pins are different on each end. One end has "pressure teeth" and the other end is flat. VERY IMPORTANT: If the side that came out first is flat, then you will need to push the pin back in and get it out from the opposite side (in other words, repeat step 2 from the opposite side), until you see the "teeth" side come out first. This is to avoid making the pin hole bigger by forcing the "teeth" end through the hole and "carving" a larger hole than needed for the pin. If you are unable to push the pin out by hand, you will need a small hammer to push it out, or pliers to pull it out.
- Repeat step 2 until you have all links removed.
- Line up the links and the pin holes and then insert a pin, FLAT END FIRST. Make sure the pin goes through the holes of the links you tried to line up and connect and that it does not stick out on either end.
How to add links to your Maui Kool watch
- Identify where in the band you would like to add your extra link or links and find the hole of the link on either side of the band.
- With a tool or a pin pusher (not included with the watch), slowly but with a decent amount of pressure push on any of the visible pins of the links at either side of the band until the pin starts coming out from the opposite side. It is always recommended to try removing the pins that are closer to the clasp. NOTE: Pins are different on each end. One end has "pressure teeth" and the other end is flat. VERY IMPORTANT: If the side that came out first is flat, then you will need to push the pin back in and get it out from the opposite side (in other words, repeat step 2 from the opposite side), until you see the "teeth" side come out first. This is to avoid making the pin hole bigger by forcing the "teeth" end through the hole and "carving" a larger hole than needed for the pin. If you are unable to push the pin out by hand, you will need a small hammer to push it out, or pliers to pull it out.
- Insert the extra link.
- Line up the links and the pin holes and insert the extra pin, FLAT END FIRST. Make sure the pin goes through the holes of the links you tried to line up and connect and that it does not stick out on either end.
- Repeat steps 3 and 4 until you've added all the necessary links.
- Close the band by inserting the pin removed in step "2".
How to set the time on your Maui Kool watch
-
For watches that have a calendar window, pull the crown until you feel two clicks. For all other watches, pull the crown until you feel it click once.
-
Adjust time by turning the crown either clockwise or counterclockwise.
-
Push the crown all the way in.
How to set the date on your Maui Kool watch
-
For watches that have a calendar window, pull the crown until you feel one click.
-
Adjust the date by turning the crown counterclockwise until you reach the desired date.
-
Push the crown back in.